CROSS DOCKING PROCESS USING ADVANCED WAREHOUSE MANAGEMENT AX 2012 R3

-

CROSS DOCKING PROCESS USING ADVANCED WAREHOUSE MANAGEMENT AX 2012 R3

Hello Folks, Warehouse Management in AX is bit interesting in exploring and challenging at the same time to explore and configure. This blog will walk through the cross docking process using advanced warehouse management features
Receiving Process for cross dock purchase order using HHT
Keeping in mind, the business scenario, the purchase order will be created by buyer in AX and it will be confirmed
1
Once the commercial invoice received from the vendor, the load will be created by the transportation coordinator
2
User will click on To new load and will create the load.
3
As per the commercial invoice, warehouse planner will create the ASN template and upload in the system
4

Warehouse admin will follow the navigation in HHT/WMDP: Login in HHT
1.1
Click on inbound in main menu
1.2
Click on LP receiving
1.3
Enter the consignment number and,
1.4
Click ok and below screen will display subsequently
1.5.png
1.6
Open work will be created in AX as per the ASN
1.7
Again user will login into HHT by following the navigation: Login in HHT
1.1
click on display work in main menu and filter work by purchase order and,
2.1
select the work id and click ok
2.2.png
Pallet is getting picked from Receiving area. Once the picker click ok. Pallet will be picked and below screen will display
2.3
Now the pallet has been ready to put to Qc Area 1 and User will ok and display work will display and again filter the work
2.4
Select the work id and click ok.
2.5
Pallet is getting picked from QC Area 1. Once the picker click ok. Pallet will be picked and below screen will display the put location
2.6
Closed work in AX as per the ASN/Consignment receiving put-away using HHT device
2.7
Continue with the business scenario, now the items has been received, inspected and put in cross dock area. Now, buyer/warehouse planner will cross dock the item using cross dock functionality available in purchase order form Retail action tab.
Below section will explain the cross docking process in AX which will create an automatic transfer order in AX
Creation of transfer order via purchase order this will be done in AX
Keeping in mind, the business scenario, with respect to the same the purchase order, buyer will team or warehouse team will cross dock the received consignment and create the transfer order to complete the picking process using HHT device
Buyer/warehouse admin will click on retail action tab and click on cross dock tab
3.1
Buyer will select the cross dock warehouse and enter quantities and click on calculate quantities
3.2
Once the user click on calculate quantities, the cross docking quantity filed will get updated. After that user will click on create order button in cross docking form
3.3

Transfer order picking process using HHT
User will login in AX and go to inventory management module and select the cross docking transfer order
4.1
Transfer order lines will be automatically reserves. Warehouse user will click on release to warehouse and an infolog will be displayed
4.2

Warehouse user will click close the infolog and click on work detail button of selected transfer order and created open work will be displayed
4.3

Warehouse admin will follow the navigation in HHT/WMDP:
Login in HHT
1.1

Click on display work and filter by transfer issue
4.4
Select the work id and click ok
4.5
As per the business, user will go to the system suggested location, scan the pallet and click ok
4.6
As per the business, user will go to the system suggested location, PUT the pallet. Also, this is the case of bulk picking as the pallet in this location suffices the full quantity.
User will ok and display work will display and again filter the work by work id
4.7.png
Select the work id and click ok. The QC area is customization as per the business for outbound. The customized screen will be incorporated once the solution feasibility is checked with technical
4.8
Once the picker click ok. Below screen will display
4.9.png
Once the user click ok. The display work form will be displayed with no work id of USMF-000335
5.png
Closed work in AX as per the transfer order no-000071 using HHT device
5.1.png

This is one type of cross docking which can be used with advanced warehouse management in AX 2012 R3.

Comments

  1. Kani MozhiAugust 24, 2020 at 1:10 AM

    I think everyone should know such information like you have described on this post. Thank you for sharing this explanation.Your final conclusion was good. We are sowing seeds and need to be patiently wait till it blossoms.
    Procurement Management Software
    Purchase Management Software
    e Procurement Management Software
    Procurement Management System

    ReplyDelete

Post a Comment

Popular posts from this blog

Warehouse Management System in AX 2012-Set Up & Configuration

-
Image
Warehouse Management System in AX 2012-Set Up & Configuration Hi All, As promised in my last post, I am back with WMS feature in AX 2012 R3. This is very interesting  and absolutely a new module that has been added to AX 2012 R3 whose purpose is basically to monitor and automate warehouse processes. WMS in AX is an Advanced distribution which provides complete real time and global view in the business efficiently. Warehouse Management for Microsoft Dynamics AX is an integrated warehousing solution for advanced distribution and order fulfillment that adds to the current capabilities of Microsoft Dynamics AX to support distribution companies and logistics providers. Overview of Features : You can configure inbound and outbound intelligent workflows. You can assign orders to clusters to pick from a single location, and configure profiles to control the validation and packing of items into shipping containers. You can create, implement, and release work by using batch-
Read more

Create Item/Product and Product master in Dynamics AX 2012 R2

-
Image
Create Item/Product and Product master in Dynamics AX 2012 R2 In This Article we are going to discuss how to create a product and Product master (Items). In 2012 R2, ‘ Item’  is replaced with ‘ Product’ . Item master was in Inventory Management Module, now there is a separate module for item/product creation ‘Product Information Management’. There are two types of Products in 2012 they are: 1. Product 2. Product Master 1. Product: Clearly identifiable products that do not have variations associated with them. You can think of them as standard or base products. Use the  Products list page  in the  Product information management  module to view and manage products. Manage Product: 2. Product Master: These serve as templates or models for  variants . The  variants  of a product master can be either predefined or created in sales scenarios by using a product configuration. A product master is associated with one or more product  dimensions , or for some confi
Read more

D365: Request for quotations (RFQ). Process RFQ overview

-
Image
D365: Request for quotations (RFQ). Process RFQ overview In this blog post I am going to review one type of procurement solicitation that is available within Microsoft dynamics 365 for Finance and Operations – Requests for quotations (RFQ). In general, RFQ is used when the company wants to receive competitive offers from several vendors for the goods they might purchase. As the result, company invite suppliers into a bidding process to bid on specific products or services, it is some kind of putting out goods to tender or requesting for proposal. And now it’s time to step up to the plate and follow the process presented below: I would like to bring to the table details on creating an RFQ, sending it to vendors, and evaluating bids returned by vendors. The first step in the RFQ process is to set up prerequisites. The following prerequisites are required for this functionality. Let’s break each setting down… Procurement and sourcing parameters for requests for quot
Read more